BMW N47 is a four-cylinder common rail diesel engine that has many improvements over its predecessor, the M47. In 2019 it will be replaced with the B47.
Video BMW N47
First use
The N47 engine debuted in March 2007 in the facelifted 1 Series BMW E87 and E81 and was available in the 1 Series BMW E82 and E88, which were introduced later in the same year.
Maps BMW N47
Usage in other models
The engine also became available in the 5 Series BMW E60 and E61 from September 2007, several months after the 5 series was face lifted, during which time the older M47 remained available.
In the 2008 model year 3 Series E90/E91/E92/E93 when the entire 3 series range gained the company's Efficient Dynamics technology. Not long after it became available in the X3 and has since then become available in the X1.
The N47 comes as a 1598 cc (D16) and 1995 cc (D20) unit, the latter identical in capacity to the BMW M47TU/TU2 series.
115 bhp version
The 115 bhp tune is for the entry level E81 and E87 116d, as well as the entry level 3 Series E90 316d.
143 bhp version
The 143 bhp model was used in the
- E81, E82, E87 and E88 118d
- E90 and E91 318d
- F20 118d
- F30 and F31 318d
- E84 X1 sDrive18d and xDrive18d
- 2010-present MINI Countryman Cooper SD (R60)
- 2010-present MINI Cooper SD (R56)
- 2010-present MINI Cabrio Cooper SD (R57)
- 2010-present MINI Coupe Cooper SD (R58)
- 2012-present MINI Roadster Cooper SD (R59)
- 2013-present MINI Paceman Cooper SD (R61)
- X3 xDrive18d.
163 bhp version
A new 163 bhp/265 lb ft (360 N m) derivative was introduced in September 2009 for the 2010 model year. This version featured exceptionally low CO2 emissions of only 109 g/km and fuel consumption of 68.9 mpg
This version was used in the E90 BMW 320d Efficient Dynamics
177 bhp version
The "standard" x20d model has 14 extra bhp, at 177 bhp but 7 lb ft of torque less at 258 lb ft(350 N m). This is found in the
- E81/E82/E87/E88 120d
- E90/E91/E92/E93 320d
- 5 Series E60 and E61 520d
- E84 X1 X1 sDrive20d, X1 xDrive20d and E83 X3 xDrive20d.
In Europe, this particular version is one of the most popular engines in the entire range; the best selling 3 series is the 320d, while the 520d is the UK's best selling 5 series.
The updated version of this engine introduced in March 2010 produces 135 kW/184 hp@4000 rpm and 380 Nm@1750-2750 rpm.
Twin turbo version
In October 2007, BMW introduced a twin sequential turbo model. With 204 bhp, it is the first production diesel on sale to achieve a specific output of over 100 bhp per liter. It uses the same turbo technology first shown in the E60 535d.
This engine is on sale in the E81/E82/E87/E88 123d and the E84 X1 xDrive 23d. This is the engine, which won the International Engine of the Year Award 2010.
Variants
Timing chain problems
The N47 engine family is prone to excessive timing chain wear and premature failure. Rattling noise from the rear of the engine is indicative of the condition. Timing chain failure may call for engine replacement or a costly repair. The most seriously affected units which require the most extensive repairs were produced from 01.03.2007 to 05.01.2009.
Other issues
The return spring on the turbo's waste-gate was not originally lubricated or covered, this frequently resulted in early failure causing the waste-gate to remain partially or fully open. With the subsequent loss in compression, fuel consumption increased by 30%-50%. The problem was described by BMW engineers as a "known fault" and was immediately repaired (BMW mobile engineers even carried boxes of an improved spring), however BMW refused to compensate customers for the excessive fuel consumption and denied this fault was their liability.
References
External links
- The UnixNerd's BMW N47 engine page with photos, history and common problems.
Source of the article : Wikipedia
0 Comments